4 PORT POE SWITCH
Features
- Support Power over Ethernet cable device for example wireless AP and IP camera.
- Support IEEE802.3af/at standard .
- Transmission distance 250m, it can be flexible installation for wireless AP and surveillance project.
- Support upward port auto MDI/MDIX.
- Adopted storage forward switch system.
- Smart Power and minimum consumption, guarantee PD requirement.
- Provided with power supply circuit protection function and protection back-end device safety
- Automatically provide the adaptive device
- Fanless design realize saving energy and environment protection
- No noise design can reduce the affect for environment
- Compact size design
- Support IEEE802.1 Q VLAN and 4K VLANs
- Support loop circuit detection
- Support saving power function when port unconnection
| PoE Switches | |
|---|---|
| Network Port | 4 10/100Mbps PoE RJ45 port(port 1~port 4); 2 10/100Mbps Non-POE RJ45 port(port 5~port6) |
| Transfer Rate | 100Mbps full Duplex,10 or 100Mbps Half Duplex; Network interface:10BASE-T or 100BASE-TX; Ethernet RJ-45 port |
| Performance | Ethernet RJ-45 port; Network delay(100 to 100Mbps): Maximum 20 μs(using 64 byte packet); MAC address capacity:1K ; Frames filter and transfer rate： 10M port maximum 14,800pps; 100M port maximum 148,800pps |
| Network protocol and standard | IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX ; IEEE 802.3x Flow Control; IEEE 802.3af/at Power over Ethernet |
| Power pin | 1/2(+),3/6(-) |
| Power | Total power:60W(PoE Port:1～4) (Each country use customized power plug) |
File Name
Type
Download
