2. Home
  3. Products
  4. PoE Switches
  5. L2 PoE Switches

HF-SGGH08-120W

  • Network Port: 8 10/100/1000Mbps PoE RJ45 port (port 1～port 8); 2 X UPLINK:1000Mbps (port 9 ~ port 10)
  • Transfer Rate: 1000Mbps full Duplex
  • Performance : Bandwidth: 20Gbps (no block）; Forwarding Mode: store and Forward; Packet Forwarding Rate: 14.88Mpps; 8K MAC address table
  • Network protocol and standard: IEEE 802.3i 10BASE-T , IEEE 802.1p, IEEE802.1q, IEEE802.1d, IEEE802.1s,IEEE802.1w, IEEE 802.3u 100BASE-TX , IEEE802.3ab: 1000BASE-T, IEEE 802.3x Flow Control , IEEE802.3z: 1000BASE-X, IEEE 802.3af/at Power over Ethernet
  • Power pin: 1/2(+),3/6(-)
  • Power: Total power: 96W Single port maximum output power: 30W
  • Input Voltage Range: DC :48~56V

 8 PORT POE SWITCH 

 

  Features

  • Support AI Extend, ports 1-8 support 250 effective meters (Cat.5 or above)
  • Support AI VLAN, ports 1-8 isolation for network security
  • Support standard IEEE 802.3 af/at protocol, automatically detect and identify the PD devices comply with IEEE 802.3 af/at protocol and supply power.
  • Support upward port auto MDI/MDIX.
  • Adopted storage forward switching system.
  • Smart Power and minimum consumption, guarantee PD requirement.
  • Power Supply circuit protection function and protection back-end device safety
  • Automatically provide the adaptive device
  • Fanless design realize saving energy and environment protection
  • Compact size design
  • Support saving power function when port dis-connection
  • All Ports support Wire-speed forwarding capability

HF-SGH08-120W

  • Network Port: 8 10/100Mbps PoE RJ45 port (port 1～port 8); 2 10/100/1000Mbps Non-POE RJ45 port (port 9 ~ port 10)
  • Transfer Rate: 100Mbps full Duplex, 10 or 100Mbps Half Duplex; Network interface: 10BASE-T or 100BASE-TX; Ethernet RJ-45 port
  • Performance : Bandwidth: 5.6Gbps (no block); Frames filter and transfer rate： 10M port maximum 14,800pps 100M port maximum 148,800pps
  • Network protocol and standard: IEEE 802.3i 10BASE-T; IEEE 802.3u 100BASE-TX; IEEE 802.3x Flow Control; IEEE 802.3af/at Power over Ethernet
  • Power pin: 1/2(+),3/6(-)
  • Power: Total power: 96W Single port maximum output power: 30W

 8 PORT POE SWITCH

 

  Features

  • Support one key Extend, ports 1-8 support 250 effective meters (Cat.5 or above)
  • Support one key VLAN, ports 1-4 isolation for network security
  • Support standard IEEE 802.3 af/at protocol, automatically detect and identify the PD devices comply with IEEE 802.3 af/at protocol and supply power.
  • Support upward port auto MDI/MDIX.
  • Adopted storage forward switching system.
  • Smart Power and minimum consumption, guarantee PD requirement.
  • Power Supply circuit protection function and protection back-end device safety
  • Automatically provide the adaptive device
  • Fanless design realize saving energy and environment protection
  • Compact size design
  • Support saving power function when port dis-connection
  • All Ports support Wire-speed forwarding capability
  • Plug and play, easy using without configuration

HF-SDH08-120W

  • Network Port: 8 10/100 Mbps PoE RJ45(Port 1 ~port 8) ; 2 10/100 Mbps RJ45 Port Uplink(Port 9~port 10)
  • Transfer Rate: 100 Mbps full duplex
  • Performance : Bandwidth: 2.0 Gbps(no block) ; Network Delay(100 to 100Mbps); maximum 20ms(Using 64 byte packet) Frame filtering and transmission rate; Forward rate: 1.48Mpps
  • Network protocol and standard: IEEE802.3i, IEEE 802.3u, IEEE802.3x, IEEE802.3af, IEEE802.3at
  • Power pin: 1/2+, 3/6- Power
  • Power: 30w Internal Power Supply: 96W

 8 PORT POE SWITCH

 

  Features

  • 8x10/100Base-TX Ethernet ports (PoE ports) and 2x10/100BaseTX up-link port
  • Support IEEE802.3af/at standards
  • Max. 30W output of single port One-key
  • 6KV surge protection, 8KVESD immunity and anti-interference
  • CCTV Extend:1-4 ports support 250 meters
  • VLAN, AI QoS, AI PoE
  • Built –in Power supply

HF-SH04-60W

  • Network Port: 4 10/100Mbps PoE RJ45 port(port 1~port 4); 2 10/100Mbps Non-POE RJ45 port(port 5~port6)
  • Transfer Rate: 100Mbps full Duplex,10 or 100Mbps Half Duplex; Network interface:10BASE-T or 100BASE-TX; Ethernet RJ-45 port
  • Performance : Ethernet RJ-45 port; Network delay(100 to 100Mbps): Maximum 20 μs(using 64 byte packet); MAC address capacity:1K ; Frames filter and transfer rate： 10M port maximum 14,800pps; 100M port maximum 148,800pps
  • Network protocol and standard: IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX ; IEEE 802.3x Flow Control; IEEE 802.3af/at Power over Ethernet
  • Power pin: 1/2(+),3/6(-)
  • Power: Total power:60W(PoE Port:1～4) (Each country use customized power plug)

 4 PORT POE SWITCH

 

 Features

  • Support Power over Ethernet cable device for example wireless AP and IP camera.
  • Support IEEE802.3af/at standard .
  • Transmission distance 250m, it can be flexible installation for wireless AP and surveillance project.
  • Support upward port auto MDI/MDIX.
  • Adopted storage forward switch system.
  • Smart Power and minimum consumption, guarantee PD requirement.
  • Provided with power supply circuit protection function and protection back-end device safety
  • Automatically provide the adaptive device
  • Fanless design realize saving energy and environment protection
  • No noise design can reduce the affect for environment
  • Compact size design
  • Support IEEE802.1 Q VLAN and 4K VLANs
  • Support loop circuit detection
  • Support saving power function when port unconnection

HF-SEH04-60W

  • Network Port: 4 10/100Mbps PoE RJ45 port(port 1~port 4), 1 10/100Mbps Non-POE RJ45 port(port 5)
  • Transfer Rate: 100Mbps full Duplex,10 or 100Mbps Half Duplex, Network interface:10BASE-T or 100BASE-TX, Ethernet RJ-45 port
  • Performance : Bandwidth:1.0Gbps (no block); 100M port maximum 148,800pps Frames filter and transfer rate： 10M port maximum 14,800pps; MAC address capacity:1K; Network delay(100 to 100Mbps): Maximum 20 μs(using 64 byte packet);
  • Network protocol and standard: IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX; IEEE 802.3x Flow Control ; IEEE 802.3af/at Power over Ethernet
  • Power pin: 1/2(+),3/6(-)
  • Power: Total power:60W(PoE Port:1～4) (Each country use customized power plug)

 4 PORT POE SWITCH

 

  Features

  • Support Power over Ethernet cable device for example wireless AP and IP camera.
  • Support IEEE802.3af/at standard .
  • Transmission distance 250m, it can be flexible installation for wireless AP and surveillance project.
  • Support upward port auto MDI/MDIX.
  • Adopted storage forward switch system.
  • Smart Power and minimum consumption, guarantee PD requirement.
  • Provided with power supply circuit protection function and protection back-end device safety
  • Automatically provide the adaptive device
  • Fanless design realize saving energy and environment protection
  • No noise design can reduce the affect for environment
  • Compact size design
  • Support IEEE802.1 Q VLAN and 4K VLANs
  • Support loop circuit detection
  • Support saving power function when port unconnection

Toll free Number: 1800 103 9001

Image

Products

Informations

Contact Info

Toll free Number

1800 103 9001

Email

info@hifocuscctv.com
support@hifocuscctv.com